11
STEP 3
STEP 4
Remove the four image drums/toner cartridge units and
place them on a flat surface.
Cover them with dark paper or plastic to protect them
from light.
STEP 5
STEP 6
Lift the transfer belt latches to release them.
Grasp the blue handles and lift the transfer belt out.
Dispose of it in accordance with local regulations.
WARNING: Do not incinerate the used transfer belt. It
may explode and cause a fire hazard.
STEP 7
STEP 8
Unpack the new transfer belt, grasp the blue handles and
lower the left side of the belt into the printer, fitting the
pins into the guides at the front and back, then lower the
right side.
Push down on the belt latches to lock the new belt in
place.
