_________________________________________________________________________________________________________________________
PAGE 94
---
iTerra Elite
Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
II. CONTROL PANEL MESSAGES
The liquid crystal display (
LCD
) on the control panel indicates the printer status and if there is a problem with the printer.
Status and
error messages are listed below together with an explanation of what each message means:
LCD
LCD MESSAGE
MEANING
***** DRUM NEAR LIFE
An image drum is nearing the end of its life (***** indicates color).
***** EMPTY
Warning that Tray ***** is empty. MP Tray is Tray 0.
***** NEAR END
The paper in the selected ***** is nearly finished.(***** indicates paper tray).
***** TONER LOW
Toner is low (***** indicates color).
***** TONER SENSOR ERROR
Error with the toner sensor (***** indicates
color). Call for service.
BELT UNIT MISSING
Transfer belt unit is missing.
CANCELLING JOB
Canceling the current job.
CENTRO I/F ERROR
Centronics interface error (parallel interface).
CHANGE ***** IMAGE DRUM
Change the image drum (***** indicates color).
CHANGE BELT UNIT
Change the transfer belt.
CHANGE FUSER UNIT
Change the fuser unit.
CHANGE PAPER TO *****
Paper must be changed to correct paper size and/or media type (***** indicates size or
media type).
CHECK *****
Check Tray ***** for paper jam. MP tray is Tray 0.
CHECK BELT UNIT
Check the transfer belt for paper jam, correct
installation, etc.
CHECK DUPLEX
Check the duplex unit for paper jam, correct
installation, etc.
CHECK FUSER UNIT
Check the fuser unit for paper jam, correct
installation, etc.
CHECK IMAGE DRUM
Check the image drum for correct installation,
etc. Color will be indicated.
COLLATE FAIL
Collating of multiple copies has failed.
