Isuzu 3CH1-NGZG01 Introduction Manual Download Page 27 | Manualshive

Page: 27 / 114

background image

PRODUCT OVERVIEW

21

ELECTRONIC CONTROL SYSTEM

WARNING

• Never use the E-ECU for other purposes than

intended or in other ways than specified by
Isuzu. Doing so could result in the violation of
emission control regulations and will void the
product warranty.

• Improper use or misuse of the E-ECU may

result in death or serious injury due to an
abrupt and unexpected increase in engine
speed.

WARNING

• Be sure to use the E-ECU in conjunction with

the engines whose models or serial numbers
are specified by Isuzu.
Other E-ECU/engine combinations than
specified will void the engine warranty.

• Improper use or misuse of the E-ECU may

result in death or serious injury due to an
abrupt and unexpected increase in engine
speed.

WARNING

• Replacing the fuel injection pump involves

rewriting the fuel injection data in the E-ECU.
Be sure to contact your Isuzu Distributor
before replacing the fuel injection pump.
Failure to rewrite the fuel injection data before
replacing the fuel injection pump will void the
engine warranty.

• Improper use or misuse of the E-ECU may

result in death or serious injury due to an
abrupt and unexpected increase in engine
speed.

WARNING

• Replacing the E-ECU involves migrating the

fuel injection data to the existing E-ECU to the
new unit. Be sure to contact your Isuzu
Distributor before replacing the E-ECU.
Failure to migrate the fuel injection data
before replacing the E-ECU will void the
engine warranty.

• Improper use or misuse of the E-ECU may

result in death or serious injury due to an
abrupt and unexpected increase in engine
speed.

3CE1

TNV_OperationManual_T4(under 19kW).book Page 21 Wednesday, June 17, 2015 11:23 AM

«
...
25
26
27
28
29
...
»

Summary of Contents for 3CH1-NGZG01



















































































































Reviews:

No comments

Related manuals for 3CH1-NGZG01

Brand: Waukesha Pages: 142

Brand: Briggs & Stratton Pages: 6

Brand: Bodine Pages: 8

Brand: Zenoah Pages: 4

Brand: BGS technic Pages: 8

Brand: Briggs & Stratton Pages: 120

Brand: aFe Power Pages: 16

Brand: Honda Pages: 130

Brand: FAAC Pages: 20

Brand: O.S. engine Pages: 29

Brand: Nakanishi Pages: 2

Brand: Nakanishi Pages: 2

Brand: Nakanishi Pages: 2

Brand: Mitsubishi Pages: 155

Brand: Yanmar Pages: 316

Brand: Kärcher Pages: 137

Brand: Farymann Diesel Pages: 80

GMAX II 3900 Premium

Brand: Graco Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands