Isuzu 3CH1-NGZG01 Introduction Manual Download Page 12

Page: 12 / 114

SAFETY

DANGER

Crush Hazard!

• When you need to transport an

engine for repair, have a helper
assist you to attach it to a hoist
and load it on a truck.

• Never stand under a hoisted engine. If the

hoist mechanism fails, the engine will fall on
you, causing death or serious injury.

• Failure to comply will result in death or

serious injury.

WARNING

Sever Hazard!

• Keep hands and other body parts

away from moving/rotating parts
such as the cooling fan, flywheel
or PTO shaft.

• Wear tight-fitting clothing and keep your hair

short or tie it back while the engine is running.

• Remove all jewelry before you operate or

service the machine.

• Never start the engine in gear. Sudden

movement of the engine and/or machine
could cause death or serious personal injury.

• Never operate the engine without the guards

in place.

• Before you start the engine make sure that all

bystanders are clear of the area.

• Keep children and pets away while the engine

is operating.

• Check before starting the engine that any

tools or shop rags used during maintenance
have been removed from the area.

• Failure to comply could result in death or

serious injury.

WARNING

Exhaust Hazard!

• Never operate the engine in an

enclosed area such as a garage,
tunnel, underground room,
manhole or ship’s hold without
proper ventilation.

• Never block windows, vents, or other means

of ventilation if the engine is operating in an
enclosed area. All internal combustion
engines create carbon monoxide gas during
operation. Accumulation of this gas within an
enclosure could cause illness or even death.

• Make sure that all connections are tightened

to specifications after repair is made to the
exhaust system.

• Failure to comply could result in death or

serious injury.

WARNING

Alcohol and Drug Hazard!

• Never operate the engine while

you are under the influence of
alcohol or drugs.

• Never operate the engine when you are feeling

ill.

• Failure to comply could result in death or

serious injury.

TNV_OperationManual_T4(under 19kW).book Page 6 Wednesday, June 17, 2015 11:23 AM

Summary of Contents for 3CH1-NGZG01



















































































































Search results

Summary of Contents for 3CH1-NGZG01

Reviews:

Related manuals for 3CH1-NGZG01

Brands by name

Popular brands

Isuzu 3CH1-NGZG01, Introduction Manual

Search results

Summary of Contents for 3CH1-NGZG01

Reviews:

Related manuals for 3CH1-NGZG01

Brands by name

Popular brands