background image

PRODUCT OVERVIEW

33

Auto deceleration (optional)
This feature brings the running engine in low idle 
mode automatically when the accelerator pedal is 
not operated for a predetermined period of time. 
When the pedal is operated, i.e., the accelerator 
sensor is activated, the low idle mode is cancelled. 

A certain ON/OFF combination of switches (1) - (4) 
on the operator’s console Figure 20 will implement 
this optional feature. For details, see the operation 
manual for the driven machine. 

High-idling speed down (optional)
This feature decreases the high-idling speed 
depending on the engine coolant temperature. 
When the coolant temperature falls to a 
predetermined value, this feature returns the 
engine speed to the normal high idle setting, thus 
minimizing the emission of white smoke at low 
temperatures. 

A certain ON/OFF combination of switches (1) - (4) 
on the operator’s console Figure 20 will implement 
this optional feature. For details, see the operation 
manual for the driven machine. 

Others
Other optional features can be provided by 
selecting certain ON/OFF combinations of switches 
(1) - (4) on the operator’s console Figure 20 will 
implement this optional feature. For details, see the 
operation manual for the driven machine.

TNV_OperationManual_T4(under 19kW).book  Page 33  Wednesday, June 17, 2015  11:23 AM

Summary of Contents for 3CH1-NGZG01



















































































































Reviews: