19
3.8.1.7 LED2 brightness
Configure the brightness of LED2.
3.8.2 Defined LED State
This section lists all states that n-SPK indicates by LED.
3.8.2.1 Power On LED Flash Setting
This LED setting is displayed when n-SPK is turned on.
3.8.2.2 Power Off LED Flash Setting
This LED setting is displayed when n-SPK is turned off.
3.8.2.3 Pairing LED Flash Setting
This LED setting is displayed when n-SPK is in Pairing Mode.
3.8.2.4 Pairing OK LED Flash Setting
This LED setting is displayed when n-SPK is paired with a remote device successfully.
3.8.2.5 Link LED Flash Setting
This LED setting is displayed if n-SPK has a Bluetooth connection with a remote device.
3.8.2.6 Standby LED Flash Setting
This LED setting is displayed if n-
SPK doesn’t have any Bluetooth connection.
3.8.2.7 Low Battery Disallow Power On LED Flash Setting
This LED setting is displayed n-SPK is tried to turn on under low battery mode but it is disallowed.
3.8.2.8 Twin Mode Pairing Master LED Flash Setting
This LED setting is displayed if n-SPK is Twin Master in Twin Mode Pairing state.
3.8.2.9 Twin Mode Pairing Slave LED Flash Setting
This LED setting is displayed if n-SPK is Twin Slave role in Twin Mode Pairing state.
3.8.2.10 Twin Master With BT Connected LED Flash Setting
This LED setting is displayed if n-SPK as Twin Master has a Twin Mode Link and a Bluetooth connection with a remote device.
3.8.2.11 Twin Master With BT Pairing LED Flash Setting
This LED setting is displayed if n-SPK as Twin Master has a Twin Mode Link and is in Pairing Mode.
3.8.2.12 Twin Master With BT Link Back LED Flash Setting
This LED setting is displayed if n-SPK as Twin Master has a Twin Mode Link and is trying to reconnect to a remote device.
3.8.2.13 Twin Master With BT Standby LED Flash Setting
This LED setting is displayed if n-SPK as Twin Master has a Twin Mode Link and has no Bluetooth connection with a remote
