ISOUND DreamTime Pro, User Manual

Page: 5 / 44

seconds the display will stop flashing to indicate the time is set.
DST (Daylight Saving Time) setting
Switch DST to +1 or -1 to automatically adjust for Daylight
Savings Time.
Install backup clock battery
Installing/replacing backup batteries
1. Make sure the DC adapter is connected to the wall,
otherwise the time may be lost during battery replacement.
2. Open the battery compartment cover located on the
bottom of the unit.
3. Insert two “AA” batteries, checking that the positive
polarity follows the direction of the instructions inside the
battery compartment.
4.
Close the compartment cover
NOTE: Batteries must be installed in order for time and alarm
memory back-up to operate. In the event of power failure or
disconnection, if the battery is not installed, the clock and
alarm will need to be reset when power is restored.
Battery precautions
1. Use only the size and type of batteries specified.
2.
When installing batteries, observe /- polarities.
Incorrect installation of battery may cause damage to the unit.
3. Do no mix different types of batteries together (ie: alkaline
with carbon-zinc or old batteries with new ones).
4. If the unit is not going to be used for a long period of time,
remove the batteries to prevent damage due to possible
battery leakage.
5. Do not dispose of the batteries in a fire. Batteries may
explode or leak.