English
GREAT BRITAIN •
customer service
tel:
0845 300 9799
e-mail:
internet:
www.clasohlson.com/uk
Ver
. 20140314
Motion Sensor Alarm Clock
Art.no 18-2688
Model 919746
36-4803
Please read the entire instruction manual before using the product
and save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. If you have any questions regarding technical
problems please contact our customer services.
Product description
Ingenious alarm clock with large clear display and motion sensor
for controlling different functions. Snooze or switch between
time, date and temperature settings with the wave of your hand.
Adjustable brightness setting. Battery backup.
Buttons and functions
Setup
Plug the mains adaptor into a power socket. Press [ RESET ].
The clock will scan through 11:11 to 99:99 and then stop on
12:00 PM.
Setting the time
1. Set the function selector to
T SET
. The hours will begin to flash.
Press [ UP ] or [ DOWN ] to set the hours. Set to
AM
or
PM
as required.
2. Press [ MODE ]. The minutes will begin to flash.
Press [ UP ] or [ DOWN ] to set the minutes.
3. Press [ MODE ]. The seconds will begin to flash.
Press [ UP ] or [ DOWN ] to set the seconds.
4. Press [ MODE ]. The whole display will begin to flash.
Press [ UP ] or [ DOWN ] to set the year.
5. Press [ MODE ]. The month will begin to flash.
Press [ UP ] or [ DOWN ] to set the month.
6. Press [ MODE ]. The date will begin to flash.
Press [ UP ] or [ DOWN ] to set the date.
7. Set the function selector to
NORMAL
to finish.
Snooze
1. Set the function selector to
AL SET
. The hours will begin to
flash. Press [ UP ] or [ DOWN ] to set the hours. Set to
AM
or
PM
as required.
2. Press [ MODE ]. The minutes will begin to flash. Press [ UP ]
or [ DOWN ] to set the minutes.
3. Press [ MODE ]. The snooze interval will begin to flash.
Select an interval of 1–60 minutes. Press [ UP ] or [ DOWN ]
to select. You can skip this step if you like, as there is
a default snooze interval of 5 minutes.
4. Set the function selector to
NORMAL
to finish.
Switching the snooze function on and off
1. Set the on/off switch to the
AL ON
position.
“AL” appears on the display.
2. Press [ SNOOZE ] to turn off an active alarm or simply wave
your hand over the motion sensors. In order for the sensor
to work optimally, wave the palm of your hand directly over
the clock. You can repeat this 4 times before the alarm is
completely turned off.
3. If no action is taken, the alarm sounds for 1 minute for
a maximum of 4 times until it is completely turned off.
4. Set the on/off switch to
AL OFF
to turn the alarm off completely.
12/24 hour clock
Push [ DOWN ] to change between 12 and 24 hour clock display.
Temperature
Press [ UP ] to switch between Celsius and Fahrenheit.
Displaying information
Press [ SNOOZE ] or sweep your hand over the sensors to view
the current information on the display.
Brightness
Push the brightness button to adjust the setting.
Reset
Pressing the reset button using a pointed object resets
the clock to factory settings.
Backup
The battery is intended to power the alarm clock in the event of
a power cut.
Care and maintenance
Clean the product by wiping it with a soft, damp cloth.
Never use solvents or strong cleaning agents.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local authority.
Specifications
Size
17 × 9 × 5 cm
Battery
CR2032 (included)
1. Motion sensor
2. PM indicator
3. Alarm indicator
4. Brightness
5. Alarm on/off
6. [ SNOOZE ]
7. Battery
compartment
8. Battery
9. Battery cover
10. [ MODE ]
11. [ UP ]
12. Temperature
sensor
13. Function selector
14. [ RESET ]
15. DC input
16. [ DOWN ]
3
7
8
9
10
11
1
2
6
4 5
12
13
14
15
16
