8
9
EXTERNAL ROLLER SHUTTERS
ASSEMBLY
The assembly may only be performed by a qualified professional em-
ployee! Construction preparedness for the assembly: finished reveal,
coloured façade, finished outside parapets
AREA FOR ASSEMBLY
• on the top
5 - 10 mm (closed with sealing substance)
• on sides
also approximately 5 mm
• down:
leave a maximum distance of 5 mm between the leading
bar and the parapet
ASSEMBLY TOOLS:
1. Tape measure
2. Water gauge
3. Pencil
4. Hammer
5. Electric drill as per the source material
6. Cordless electric drill
7. Magnetic adapter
8. Bits PZ2, PH2, magnetic adapter on hexagonal head 8 and 10
9. Set of Allen wrenches
10. Assembly cable
11. Small ratchet wrench and 8 nut
12. Set of screwdrivers, insulated, electric
Front window roller shutter
Above-window roller shutter
Under plaster roller shutter
š
v
v
š
š
š
v
v
The ordering dimensions are the dimensions fo the finished roller shutter.
Width of the roller shutter = X
Height of the roller shutter = Y
The height and the width are always measured in a minimum of three places. The manufacturing dimensions are always the minimum
measured value. Measurements are taken after the frame or window is fitted into the construction hole after completion of the outside and
inside reveals, including parapets. The method of measurement of external roller shutter is so specific that it is recommended to consult the
technical plans at the construction site. Other specific solutions are possible.
Measuring
VÝŠKA
VÝŠKA OKENÍHO OTVORU
ŠÍŘKA
ŠÍŘKA OKENÍHO OTVORU
NADOKENNÍ PŘEKLAD
VÝŠKA
VÝŠKA OKENÍHO OTVORU
ŠÍŘKA
ŠÍŘKA OKENÍHO OTVORU
NADOKENNÍ PŘEKLAD
ROLETA SE ZAOMÍTANÝMI VODÍCÍMI LIŠTAMI
ROLETA S PŘIZNANÝMI VODÍCÍMI LIŠTAMI
D
C
B
A
2
1
5
6
6
5
2
3
4
1
D
C
A
B
ABOVE-WINDOW LINTEL
HEIGHT OF
WINDOW OPENING
WIDTH OF WINDOW OPENING
5-10
mm
