24
The distance between the outside brick lining of lintel and outside part of window frame is 220 mm.
This distance is identical for assembly of roller shutters and Venetian blinds. The distance of 165 mm is suitable for using the inserted isolation
for the roller shutter assembly.
Fitting of window frame for roller shutter assembly
Control
Motor control
Tape control
The bearing HELUZ roller shutter lintel can be fitted either with manual or electric control.
If the customer decides for the manual control using a tape, it is necessary to keep the lintel seating of 200 mm, rather 250 mm, if possible, on
the control side. The tape winds into the box located in the wall next to the window (from the left or from the right). The box must be located
along the vertical axis of the lintel aperture. In the case of electrical control of the shading systems, a wiring branch box is to be installed next
to the lintel and a cable with minimum of 3 wires with the section of 1.5 mm
2
for 230 V power supply will lead into it. The branch box with the
cable tube with the minimum diameter of 16 mm will be interconnected with the inner part of the lintel, eventually with a switch. The electri-
cal drive is to be located in the roller shutter rod or Venetian blind carrier. The entire wiring system needs to be consulted with the shading
equipment assembling company prior to applying the plastering.
When using the electrical control, we can place the lintel symmetrically on the assumption of keeping the minimum lintel seating of 200 mm
on both sides.
*INSERTED ISOLATION IS DELIVERED BY COMPANY
THAT ASSEMBLES SUN PROTECTION SYSTEMS
*INSERTED ISOLATION IS DELIVERED BY COMPANY
THAT ASSEMBLES SUN PROTECTION SYSTEMS
FITTING THE WINDOW FRAME FOR ROLLER SHUTTERS
165 mm FROM THE OUTSIDE LINING OF THE LINTEL
FITTING THE WINDOW FRAME FOR ROLLER BLINDS 220 mm
FROM THE OUTSIDE LINING OF THE LINTEL
*INSERTED
ISOLATION
*INSERTED
ISOLATION
*MODIFIED
INSERTED
ISOLATION
SLA
T
SLA
T
SLA
T
SLA
T
ROLLER
BLIND
HEIGHT
2
20
0
mm
ROLLER
BLIND
HEIGHT
2
90
0
mm
ROLLER
BLIND
HEIGHT
2
90
0
mm
ROLLER
BLIND
HEIGHT
2
20
0
mm
