6
Octoeasy shaft con-
nectors – use with a
motor
sheet-metal shaft
connectors – for
manual control
Vivera / Vivera-Sectra External Roller Shutter
Basic Product Specification
2-00330-0000-G
Slat
Width (mm)
Height (mm)
Guaranteed area (m
2
)
min.
max.
min.
max.
max.
M328, M317, MY442
450
1800
800
2500
3
Standard dimen-
sions
Vivera-Sectra
When indicating the height of box for motor operated ROLLER SHUTTER, we have to know that the box is suita-
ble for ROLLER SHUTTERS 100mm less height than the standard for handle operation is.
Maximum width of underplaster common box for outside roller shutters is 4 m and 5,5 m for visible box.
Slat
Control
Width (mm)
Height (mm)
Guaranteed area (m
2
)
min.
max.
min.
max.
max.
M328
cord, tape
450
2700
800
4350
3,5
handle, motor
450
2700
800
4350
5,8
spring
-
-
-
-
5,6 (17 kg)
M317
cord, tape
450
2900
800
4340
3,2
handle, motor
450
2900
800
4340
6,5
MY442
motor
450
4000
800
2860
8,5
Standard dimensions
Vivera
Control
Cord
- used for pulling the roller shutter up and down. White or brown ø 4.5 mm cord.
Handle
- used for pulling the roller shutter up and down. Handle – made of plastic material and steel (ø 15.5 mm or ø 13 mm
tube). Handle passage at the angle of 45° or 90°.
Tape
- used for pulling the roller shutter up and down. White or brown 14 mm wide tape.
Spring
- used for pulling the roller shutter up and down. The shutter is controlled manually, whereas the blind is wound back
by a pre-stressed spring, installed in the crank. Shaft with a diameter of 40 mm. It is required to use slats without
apertures in the lock.
Crank cord winder
- used for pulling the roller shutter up and down. White or brown color.
Crank tape winder
- used for pulling the roller shutter up and down. White or brown color.
Motor
- with the torque of 4–20 Nm, mounted in the octagonal rod with diameter of 40 mm or 60 mm. One motor can cont-
rol more roller shutter simultaneously based on the roller shutter dimensions.
60, 62-64
