24
25
EXTERNAL ROLLER SHUTTERS
Recessing of components for manual control
The manual control is performed using a tape bushing, 22 mm tape and winder recessed in the masonry next to the window.
Recessing of components for motor control
In the case of the motor control, the electric motor is installed in the roller shutter crank. We do not fit the winder box or tape bushing. In this
case, we install a branch box, cable tube and eventually a switch box next to the lintel.
Do not cut out the polystyrene inside the lintel!
Box for winder integrated in wall
along bushing axis
Cement mortar bedding
Tape bushing aperture
Branch box
Cable tube
min. ø 12 mm
Switch
Cement mortar bedding
Tape aperture axis
Tape bushing aperture
