Isotra ARTOSI, Measurement And Assembly Manual

Page: 19 / 21

MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 21.3.2022
19
2. MAINTENANCE
In order to keep the product in perfect operating and safety conditions, proceed as follows:
• Visually inspect the load-bearing structure at least twice a year (in spring and before winter). If it is
necessary, clean the surface of aluminium profiles from dirt, dust and smog. Use a softened damp cloth
for cleaning. Heavy soiling can be removed with conventional car paint cleaners. Do not use aggressive
cleaning agents such as organic thinners, solvents, cleaning pastes and sands and strong alkaline cleaners
to clean structures of the pergola.
• Check the tightening of all screws and fasteners at least twice a year (in spring and before winter).
• At least twice a year (in spring and before winter) treat the rubber seal with a product designed for this
purpose (silicone spray, etc.)
• Continuously remove coarse dirt such as twigs and branches from the slats of the pergola roof.
• Continuously check and clean the drainage channels, especially from the leaves, to prevent them from
clogging.
3. SAFETY INSTRUCTIONS
• There must be no objects or people in the moving parts of the Pergola! Do not block the slats while they
are moving and never put your hands between the slats. If the pergola is equipped with shading
technology, pull it to the upper position in case of bad weather.
• Do not allow children to play with the control. Check the pergola regularly for any leaks and damages.
In case of finding a defect or malfunction, contact your system supplier!!!
Due to continuous product improvement, the technical information provided in this manual may not
correspond to the actual condition of the delivered pergola.