ISON IS-RG528 Series, Web Configuration Tool Manual

Page: 75 / 122

75
NO Entry Index, max 64.
VID VLAN ID (1~4094)
Version IGMP Version: IGMPv2 or IGMPv3.
Run Version Current running IGMP version.
Mode IGMP Access Mode: Normal Snooping (default) or Proxy.
Leave Mode IGMP Leave Mode: Normal Leave (default) or Fast Leave.
Robustness IGMP VLAN robustness variable. (1~3)
Robustness Run Value Display QRV value or configured value:
To support QRV and QQIC in IGMPv3 mode. Industrial Ethernet Switch support 2
parameters to represent the running Robustness Variable and running Query Interval.
These 2 parameters is support for each IGMP VLAN interface. When IGMPv3 proxy
mode, these 2 value will apply the value which get from IGMPv3 Query packet. In other
mode, the value is applied the configured value.
Query Interval (sec) IGMP VLAN query interval.(unit: sec)
Default: 125 seconds
Limitation: Query Interval>Max Response Time
Query Interval Run Value
(sec)
Display QQIC value or configured value:
To support QRV and QQIC in IGMPv3 mode. Industrial Ethernet Switch support 2
parameters to represent the running Robustness Variable and running Query Interval.
These 2 parameters is support for each IGMP VLAN interface. When IGMPv3 proxy
mode, these 2 value will apply the value which get from IGMPv3 Query packet. In other
mode, the value is applied the configured value
Max Response Time IGMP VLAN max response time.
Default: 10.0 seconds. (Display in second, configure it with 0.1 second)
The Query Interval and Max Response Time are constrained as follows: Query Interval
> Max Response Time
Group Membership Time IGMP Group Membership Time (Unit: sec) Read-only
Last Member Query
Interval
IGMP VLAN last member query interval. (Display in second, configure it with 0.1
second) Default: 0.1 second
Last Member Query
Count
IGMP VLAN last member query count, range 1~3. Default: 2