ISON IS-RG528 Series Web Configuration Tool Manual Download Page 11

Page: 11 / 122

Note:

Trunk Group 1 & 2 CANNOT take the member port that is

already assigned to another Trunk Group; Max 4 member ports in a Trunk Group.

Otherwise, the modification would be failed.

Member Port

Display current member port of Trunk Group.

Mode

To enable/disable Link Aggregation for Trunk Group.

GE-1~

GE-xx (xx=10~28)

To select member ports for Trunk Group. If Link Aggregation mode is disabled,

then the member port would be cleared, that represents no member port is assigned

to Trunk Group.

2.3.2 802.1x Authentication

2.3.2.1 RADIUS Setting

Operation

Modify:

1. Modify Server IP, Authentication Port and Secret Key fields.

2. Click "Modify" button to apply change.

Field

Description

Server IP

The IP address of RADIUS server.

Allow IPv4 address. 0.0.0.0 means disable RADIUS.

Default is 0.0.0.0.

Summary of Contents for IS-RG528 Series



























































































































Search results

Summary of Contents for IS-RG528 Series

Reviews:

Related manuals for IS-RG528 Series

Brands by name

Popular brands

ISON IS-RG528 Series, Web Configuration Tool Manual

Search results

Summary of Contents for IS-RG528 Series

Reviews:

Related manuals for IS-RG528 Series

Brands by name

Popular brands