ISON IS-RG528 Series Web Configuration Tool Manual Download Page 105

Page: 105 / 122

105

Operation

Modify:

1. Select Row data checkbox.

2. Modify Level and Mask.

Note: When any alarm exists, the Alarm LED will be lit, and Alarm Output Relay will

also be enabled.

3. Click "Modify" button to modify data.

Field

Description

Alarm Type ID.

Description

Alarm Type Description.

Level

No matter alarm is major/minor, Alarm LED color always be red.

Mask

If alarm is masked, then alarm item will not be captured in alarm history/current; SNMP

trap either. If specific alarm item is masked, then it will not trigger the Alarm LED on or

off.

2.5.5 CLI Options

Operation

Modify:

1. Modify the configuration.

2. Click

“Modify” button to apply change.

Field

Description

Idle Timeout

Specify the timeout seconds for the operational interface. The session will be closed

once the idle time exceeds this timeout value.

Value range is 60 ~ 65535. 0 means disable timeout.

Max session count

Specify the maximum allowed sessions for the CLI (command line interface): 1 ~ 10.

Summary of Contents for IS-RG528 Series



























































































































Search results

Summary of Contents for IS-RG528 Series

Reviews:

Related manuals for IS-RG528 Series

Brands by name

Popular brands

ISON IS-RG528 Series, Web Configuration Tool Manual

Search results

Summary of Contents for IS-RG528 Series

Reviews:

Related manuals for IS-RG528 Series

Brands by name

Popular brands