ISON IS-DS5150, User Manual

Page: 61 / 66

n
- 61 -
16(0x10) Preset Multiple Registers (Write AOs)
This function code is used to set multiple holding registers that are used to store the configuration
values.
[Request]
Byte Description Size Value
00 Net ID (Station Number) 1 Byte 1 to 247
01 Function Code 1 Byte 0x10
02-03 Starting AO Address 2 Bytes
Refer to the Modbus address depends on your
slave device for more details.
Byte 02 = high byte
Byte 03 = low byte
04-05
Number of 16-bit Registers
(Channels)
2 Bytes
Word Count.
Byte 04 = high byte
Byte 05 = low byte
06 Byte Count 1 Byte n =Points x 2 Bytes
07 Register Values n Bytes
Register Values.
n= 2; Byte 03 = high byte
Byte 04 = low byte
.......
n= m; Byte 03 = high byte
Byte 04 = low byte
.......
Byte m+1 = high byte
Byte m+2 = low byte
[Response]
Byte Description Size Value
00 Net ID (Station Number) 1 Byte 1 to 247
01 Function Code 1 Byte 0x10
02-03 Starting AO Address 2 Bytes
The value is the same as Bytes 02-03 of the
Request
04-05
Number of 16-bit Registers
(Channels)
2 Bytes
The value is the same as Bytes 04-05 of the
Request
[Error Response]
Byte Description Size Value
00 Net ID (Station Number) 1 Byte 1 to 247
01 Function Code 1 Byte 0x90
02 Exception Code 1 Byte
Refer to the Modbus Standard Specifications for
more details.