n
- 18 -
3.
Getting Started
This chapter provides detailed information about the “Self-Test” process, which is used to confirm
that the IS-MS3180 series module is operating correctly. Before beginning the “Self-Test” process, the
wiring test, Ethernet configuration and search/Modbus utility driver installation procedures must first
be fully completed. Follow the procedure described below:
3.1
Connecting the Power and Host PC
1.
Ensure that the network settings on your PC are configured correctly.
Ensure that the Windows firewall or any Anti-Virus firewall software is correctly configured or
temporarily disable these functions; otherwise the “Search Servers” function in the ISON
eSearch Utility may not work as required. You may need to contact your System Administrator
for more details of how to do this.
2.
Check that the Init/Run switch
is in the “Run” position.
3.
Connect both the IS-MS3180 and the Host computer to the same sub-network or the same
Ethernet Switch, and then supply power (PoE or +12 to +48 V
DC
) to the IS-MS3180.
4.
Verify that the System (S1) LED indicator
is flashing.
