n
- 46 -
Step 2: Configuring the Ethernet Settings
Contact your Network Administrator to obtain the correct and functioning network configuration
for the IS-MS3180 modules (including the IP Address, Mask and Gateway details). Also refer to
Chapter 3 “Getting Started”
for more details.
Step 3: Configuring the Pair-connection (Client Mode) on the Web Server
for IS-MS3180#1
1.
Open the ISON eSearch Utility to search for the IS-MS3180 modules connected to the network.
Click the name of the first tGW-715 module (IS-MS3180#1) to select it, and then click the “Web”
button to launch a browser window to connect to the web server on the IS-MS3180 #1 module.
Alternatively, you can enter the URL for IS-MS3180 #1 in the address bar of the browser.
2.
When the login screen is displayed, enter the password
(use the default password “admin”) in
the Password field, and then click the “Submit” button to display the configuration page.
3.
Click the “Port1” tab to display to the Port1 Settings page.
4.
Select the appropriate Baud Rate, Data Format and Modbus Protocol settings from the relevant
drop down options. The following is an example: Baud Rate (bps) “115200”, Data Bits (bits) “8”,
Parity “None”, Stop Bits (bits) “1” and Modbus Protocol “Modbus RTU”.
5.
In the Pair-connection Settings area for Port1, check that the configuration details are the same
as those shown below.
Field
Server
Mode
Modbus
Protocol
Remote
Server IP
Remote TCP
Port
TCP Slave ID
(1~247)
RTU Slave ID
(1~247)
Pair-connection
Settings
Client
TCP
10.0.8.246
502
0
0
Modbus Protocol, IP address and TCP port for
IS-MS3180#2
6.
Amend and details as required and then click the “Submit” button to complete the
configuration.
