n
- 62 -
Appendix A: Troubleshooting
A1. How do I restore the web password for the module to the factory default
password?
The instructions below outline the procedure for resetting the web password to the factory default
value.
Note: Be aware that ALL settings will be restored to the factory default values after the module is reset.
Step 1 Locate the Init/Run switch that can be found on
the right-hand side of the IS-MS3180 module and set it to
the "Init" position. Reboot the module to load factory
default settings including default web password.
Step 2 Execute either the ISON eSearch Utility to search for any IS-MS3180 modules connected to
the network. Verify that the IS-MS3180 has been reset to the original factory default settings. For
example, the module should be shown as having the default IP address, which is 192.168.0.1.
