SW-90 RGBW
6-
4.2 Power On Display
Every time you turn on the unit, it will run built-in program to reset all motors to their home
position, the display will show type and software version, you may hear some noises for
about 20 seconds. It will show warning sign if it goes wrong during resetting and you can
press the MENU button to view the error information. After that the unit will be ready to
receive DMX signal and the display will show as below.
Master Mode
Present master/slave mode
Show 1
Present show
Mode 1 4Ch.
.
Present channel mode is mode 1 (4 channels mode)
Temp. 33
°
C
Present detected temperature is 33
°
C
4.3 Main Function
Turn on the unit, press
MENU
button into menu mode, press
UP
and
DOWN
button until the
required one is shown on the monitor. Select the function by
ENTER
button. Use
UP
and
DOWN
button to choose the submenu, press the
ENTER
button to store and automatically
return to the last menu. Press
MENU
button or idling one minute to exit menu mode.
Hold
MENU
button to quit menu mode, the unit will run the built-in program you selected.
The main functions are shown below:
