SW-90 RGBW
13-
5. How To Control The Unit
You can operate the unit in three ways:
1. By master/slave built-in preprogram function
2. By easy controller
3. By universal DMX controller
5.1 Master/Slave Built-in Preprogram Function
Linking the units as the diagram, select show for the first unit (master) and set other units to
slave1 or slave 2 via menu. The master unit will control the other units to give an automatic,
sound activated, synchronized light show. This function is good when you want an instant
show.
2-light show
In slave mode, slave 1 means the unit run as the master unit and slave 2 means 2-light
show. In order to create a great light show, you can set slave 2 on the second unit to get
contrast movement to each other, even if you have two units only.
5.2 Easy Controller
The easy remote control is used only in master/slave mode. By connecting
to the 1/4” microphone jack of the first unit, you will find that the remote
controller on the first unit will control all the other units for Stand by,
Function and Mode selection.
