9
Pan Inverse
To select the
Pan Inverse
, press the
ENTER
button to show
PAN INVERSE
on the display. Use the
DOWN
and
UP
buttons to select the
Yes
(pan inversion) or
No
(normal) mode. Once the mode has
been selected, press the
ENTER
button to setup, to go back to the functions without any changes
press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for
one minute to exit the menu mode.
Tilt Inverse
To select the
Tilt Inverse
, press the
ENTER
button to show
TILT INVERSE
on the display. Use the
DOWN
and
UP
buttons to select the
Yes
(tilt inversion) or
No
(normal) mode. Once the mode has
been selected, press the
ENTER
button to setup, to go back to the functions without any changes
press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for
one minute to exit the menu mode.
Back Light
To select the
Back Light
, press the
ENTER
button to show
BACK LIGHT
on the display. Use the
DOWN
and
UP
buttons to select the
On
(display on) or
Off
(display off) mode. Once the mode has
been selected, press the
ENTER
button to setup, to go back to the functions without any changes
press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for
one minute to exit the menu mode.
Function Delay
To select the
Function Delay
, press the
ENTER
button to show
FUNCTION DELAY
on the display.
Use the
DOWN
and
UP
buttons to select the
No Delay
or
1S Delay
,
2S Delay
or
3S Delay
(wait for
a few seconds seconds before the functions for 8/11CH are activated/deactivated). Once selected,
press the
ENTER
button to setup, to go back to the functions without any changes press the
Summary of Contents for iMove 350 Beam
