iSolution iMove 350 Beam, User Manual

Page: 16 / 24

15
(LED OFF) (LED Slow Blinking)
4.3 DMX Controller
By using a universal DMX controller to control the units, you need to set a DMX address from 1 to
512 so that the units can receive a DMX signal.
Press the MENU button up to when DMX Address is showing on the display. Press the ENTER
button and the display will blink. Use the DOWN and UP buttons to change the DMX512 address.
Once the address has been selected, press and keep the ENTER button pressed up to when the
display stops blinking or it will store automatically after 7 seconds. To go back to the functions
without any change press the MENU button again.
Please refer to the following diagram to address your DMX512 channel for the first 4 units.
Channel mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
8 channels 1 9 17 25
11 channels 1 12 23 34