iSolution iMove 350 Beam, User Manual

Page: 15 / 24

14
to their ‘home’ position and you may hear some movement noises for about 20 seconds. After
that the unit will be ready to receive a DMX signal or run the built in programs.
4.1 Master/Slave Built In Pre-­‐program Function
By linking the units in master/slave connection, the first unit will control the other units to give an
automatic, sound activated, synchronized light show. This function is very good when you want an
instant show. You have to set the first unit in master mode Show Mode and select show 1 , show 2,
show 3 or show 4 mode. The DMX input socket will have nothing plugged into it, and the master
LED will be constantly on and sound LED will flash to the music. The other units will need to be set
in slave mode and select Slave 1 (normal) or Slave 2 (2 light show) mode, The units should be
linked with DMX cables plugged into the DMX input jacks (daisy chain) and the slave LEDs will be
constantly on.
2-­‐light show
In slave mode, Slave 1 means the unit works normally and Slave 2 means 2-­‐light show. In order to
create a great light show, you can set Slave 2 on the second unit to get contrast movement to
each other, even if you have two units only.
4.2 Easy CA-­‐8 Controller
The easy remote control is used only in master/slave mode. By connecting to
the 1/4” jack socket of the first unit, you will find that the remote controller on
the first unit will control all the other units in Stand by, and Mode selection.
Stand By Blackout the unit
Function 1. Sync. Strobe
2. Async strobe
3. Sound Strobe
Show
1-­‐4
1. Press to select colour
2. Hold to select gobo
Mode Sound Show LED ON