8
Slave Mode
To select the
Slave Mode
, press the
ENTER
button to show
SLAVE MODE
on the display. Use the
DOWN
and
UP
buttons to select the
Slave 1
or
Slave 2
mode. Once the mode has been selected,
press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for one
minute to exit the menu mode.
Black Out
To select
Black Out
, press the
ENTER
button to show
BLACK OUT
on the display. Use the
DOWN
and
UP
buttons to select the
Yes
(blackout) or
No
(normal) mode. Once the mode has been
selected, press the
ENTER
button to setup, to go back to the functions without any changes press
the
MENU
button again. Press and hold the
MENU
button for about one second or wait for one
minute to exit the menu mode.
NOTE:
If you set the fixture into black out mode it will no longer function in Sound/Master modes,
it will only respond to DMX control
Sound State
To select the
Sound State
, press the
ENTER
button to show
SOUND STATE
on the display. Use the
DOWN
and
UP
buttons to select the
On
(Sound Mode On) or
Off
(Sound Mode Off). Once the
mode has been selected, press the
ENTER
button to setup, to go back to the functions without
any changes press the
MENU
button again. Press and hold the
MENU
button for about one
second or wait for one minute to exit the menu mode.
Sound Sense (Sensitivity)
To select the
Sound Sense
, press the
ENTER
button to show
SOUND SENSE
on the display. Use the
DOWN
and
UP
buttons to adjust the sound sensitivity from
0
to
100
, press the
ENTER
button to
setup, to go back to the functions without any changes press the
MENU
button again. Press and
hold the
MENU
button for about one second or wait for one minute to exit the menu mode.
Summary of Contents for iMove 350 Beam
