isobus CCI A3, Operating Instructions Manual

Page: 30 / 32

28
Problem Cause/remedy
An error message is dis-
played on the top edge of
the display:
The CCI A3 does not react
to operator inputs.
An internal error has occurred.
→ Operation of the implement is no longer possible.
The CCI A3 must be restarted.
Disconnect the In-cab Coupling of the CCI A3 from the
ISOBUS and reconnect it after a further 5 seconds.
An error message is dis-
played on the top edge of
the display:
The operating elements of
the CCI A3 are not dis-
played on the terminal .
The AUX assignment can-
not be performed.
The implement cannot be
operated.
No UT is logged on to the ISOBUS with UT number "1".
Either the ISOBUS terminal is not switched on or the UT of
the ISOBUS terminal did not log on to the ISOBUS with UT
number "1".
Switch the ISOBUS terminal on.
On the ISOBUS terminal set the UT number to "1".
The buttons of operating
level 3 have a blue frame
and cannot be used.
The AUX assignment of the operating level 3 is complete
and the buttons are displayed. However, pressing a button
does not trigger an implement function.
"Critical Control" is switched on.
Trigger the implement function by simultaneously press-
ing the button and the level pushbutton.
If you do not want to use the protection of critical imple-
ment functions, switch "Critical Control" off:
1. Press the level button and maintain it pressed for 3 sec-
onds.
→
The "Settings" operating screen is displayed.
2. Press the "System" button.
3. Press the button "Critical Control".
→
"Critical Control" is switched off.
→
The buttons of operating level 3 can be operated
without pressing the level pushbutton.