3 Operation
22
3.9
Assigning a generic pictogram
NOTE
You assign generic pictograms on the
⇒
Chapter 3.7).
After AUX assignment has been completed, some implements display the
manufacturer-specific pictograms of the implement functions on the buttons
on the CCI A3.
→
The precise assignment of button to implement function is ensured.
If the implement does not display any implement function pictograms on the
CCI A3, the buttons of the CCI A3 are labelled F1, F2, etc.
Use the generic pictograms provided by the CCI A3.
NOTE
The layout of the operating screens on your terminal may differ from
the figures.
The displayed operating screens were recorded on the ISOBUS CCI 1200 ter-
minal. The portrayal on other ISOBUS terminals may differ from the figures.
Follow the instructions below and adapt the steps to the display on your
terminal.
Prior prepa-
ration
Summary of Contents for CCI A3
Page 1: ...CCI A3 ISOBUS AUX control Operating instructions...
Page 2: ......
