ISHIDA Omni-4000ST User Manual Download Page 113

Page: 113 / 135

Chapter 4 PROGRAMMING MODE

4.12.3 TEXT EDITING EXAMPLE

Text editing procedure is explained by quoting the following PLU name edit screen as an example.

To erase the entire text
displayed on the text
display field, touch
[ERASE] on the
screen.

Confirm that the text edit screen

is displayed.

Then, enter the desired PLU
number and press the PLU key
on the operating console.

Example

PLU No.5

Text edit screen for the PLU

number “5” is called.

Enter the desired characters.

Example

“Roast Fillet Steak”

Edit the text as necessary.

When the text editing is

completed, touch [FIX] to confirm
the edited text image on the text
display field.

Then, touch [RETURN] to finish
the text editing.

Omni-4000ST User’s Manual

page 4-39

Summary of Contents for Omni-4000ST








































































































































Search results

Summary of Contents for Omni-4000ST

Reviews:

Related manuals for Omni-4000ST

Brands by name

Popular brands

ISHIDA Omni-4000ST, User Manual

Search results

Summary of Contents for Omni-4000ST

Reviews:

Related manuals for Omni-4000ST

Brands by name

Popular brands