ISHIDA Omni-4000ST, User Manual

Page: 104 / 135

Chapter 4 PROGRAMMING MODE
3.
Enter a numeric value (1 – 4) for
horizontal labeling position, and
press the [SET] button in Label
Position (Horizontal) field.
4.
Label pasting test starts as soon
as a tray is placed on the weigh
platter.
The tray is discharged when the
[PLU] stroke key is pressed.
5.
Adjust the labeling position based
on the position where the label
was pasted.
(1) Press the [POSITION ADJUST]
button of the set labeling position
number.
Labeling Position Adjustment
screen is displayed.
(2) Correct the labeling position.
Items Operation
Right and left
labeling position
Adjust right and left labeling position.
The position can be moved in 1mm increments.
Upper and under label
application positions
Adjust top and bottom labeling position.
The position can be moved in 1mm increments.
Rotation angle
Change the labeling angle by pressing [+] and [-].
The angle can be set to 0°, 90° and - 90°.
When the option printer is used, the angle can be
changed in 15° increments.
(3) Press [RETURN] to return to the Tray Program screen.
page 4-30 Omni-4000ST User’s Manual