Chapter 3 TEST MODE
IP-EMZ Service Manual
3-23
Buttons/Display Fields
Function
MENU
Returns to the Test Menu 1/2 screen.
PAGE
Changes to the print adjustment (head information) screen.
Printer No.
Displays the number of the printer to be adjusted.
Press the [SET] button after a numeric entry to change the number of the
printer to be adjusted.
The data range is 1-4. The buzzer will sound if data is entered outside the
range or no data is entered.
Print Density
Displays the set print density. Press the [SET] button after a numeric entry to
set the print density. The data ranges from 0 (lightest) to 9 (darkest), and the
buzzer will sound if data is entered outside the range or no data is entered.
The default value is “5”.
Print Speed
Displays the set print speed (mm/sec). Press the [SET] button after a numeric
entry to set the print speed.
The data range is 60-130 (in units of 10mm/sec.).
The default value is “100mm/sec.”.
A slower print speed results in a higher print quality.
Test Format No.
Displays the test label format number (2 digits) to be referred to for test
printing or label feeding. Press this button after a numeric entry to set the
label format for the test print. The data range is 1-99, and the buzzer will
sound if data is entered outside the range or no data is entered. The default
value is the default format set in the printer.
Label Sensor Distance
Displays the set label sensor distance (mm). The entered data can be set as
the printer label sensor distance by pressing the [SET] button after a numeric
entry. The data range is 1-999 in increments of 0.1mm. The default value is
41.0mm.
Peel Sensor Distance
Displays the set peel sensor distance (mm). The entered data can be set as a
peel sensor distance of the objective printer by pressing the [SET] button after
a numeric entry. The data range is 1-999 in increments of 0.1mm. The default
value is 11.0mm.
Test Label Length
Displays label length (mm) for test printing. The entered data can be set as
the printer label length by pressing the [SET] button after a numeric entry. The
data range is 1-9999 in increments of 0.1mm. A buzzer will sound if data is
entered outside the range or no data is entered. The default value is the label
length of the above-mentioned test format number. The label will be fed for
the distance of the label and gap lengths.
Label Gap
Displays the set gap length (mm). The entered data can be set as a gap
length of the printer by pressing the [SET] button after a numeric entry. The
data range is 1-999 in increments of 0.1mm. A buzzer will sound if data is
entered outside the range or no data is entered. The default value is 2.5mm.
Feed
Displays the set feed length (mm). The entered data can be set as the printer
feed length by pressing the [SET] button after a numeric entry. The data
range is 1-999 in increments of 0.1mm. The default value is 7.5mm. This data
becomes the back feed length when the back feed control is performed.
Feed (Stop)
This is effective only when the automatic label applicator is used.
A label is issued leaving the set feed stop length, and fed for the length
immediately before it is sucked by the applicator. The set feed stop length is
displayed. Press the [SET] button after a numeric entry to set the feed stop
length of the printer. The data range is 1-999 in units of 0.1mm. The default
value is 3.5mm.
Test Print
(Label Print)
Select the print pattern when test printing is performed. Press either “Normal”
or “Checker” to select the item and change the button color to blue. When test
printing is performed, this selection information will be used. The default data
is “Checker”.
Summary of Contents for IP-EMZ
