manualshive.com logo in svg

ISHIDA CCW-R-2 B Series, Instruction Manual, Page: 363 / 492

Share
Download
ISHIDA CCW-R-2 B Series Instruction Manual Download Page 363

CCW-R-2**B INSTRUCTION MANUAL

11 CAUSES AND ACTIONS FOR ERRORS AND FAILURES

11-15

11.2.7 Pattern 7

If an error occurs during operation or draining, the weighing machine stops automatically and the power 
is turned off automatically.
In addition, an error screen is displayed on the screen of the remote control unit.
When a Pattern 7 error occurs, refer to “Table 11-8 Error Display List (Pattern 7)” to perform the 
correcting action.
If the error still occurs, contact the distributor or Ishida customer support to request repair service.

11.2.8 Pattern 8

When the file transfer fails, warning alarm sounds.
In addition, an error screen is displayed on the screen of the remote control unit.
When a Pattern 8 error occurs, refer to “Table 11-9 Error Display List (Pattern 8)” to perform the 
correcting action.

Table 11-8  Error Display List (Pattern 7) 

Error Name/

Error Description

Cause

Action

[ADC firmware error]

1. System error.

1. Turn off the main power switch and turn it on 

again.

2. If repair cannot be achieved by the above action 

1, contact the distributor or Ishida customer 
support to request repair service.

Table 11-9  Error Display List (Pattern 8) 

Error Name/

Error Description

Cause

Action

FILE TRANSFER ERROR

1. The ftp server is down.
2. The network is disconnected.

1. Contact the network administrator.

Summary of Contents for CCW-R-2 B Series













































































































































































































































































































































































































































































































Reviews:

No comments