manualshive.com logo in svg

ISHIDA CCW-R-2 B Series, Instruction Manual

The ISHIDA CCW-R-2 B Series is a cutting-edge product designed for efficient weighing and packaging. Ensure optimal usage with the comprehensive Instruction Manual available for free download at manualshive.com. This essential manual provides step-by-step instructions and valuable insights to maximize the potential of your ISHIDA CCW-R-2 B Series.

Share
Download
background image

6 FUNCTIONS OF THE OPERATION SCREENS

CCW-R-2**B INSTRUCTION MANUAL

6-86

[Mean Count]
* Displayed during count set 
weighing only.

The mean count of proper dumps that occur between the start time and stop time.
Unit: pcs
Displays the mean count for the channel during channel total display.
Displays the mean count for the section during section total display.

[S.D. Count]
* Displayed during count set 
weighing only.

The standard deviation count of proper dumps that occur between the start time and 
stop time.
Unit: pcs
Displays the standard deviation count for the channel during channel total display.
Displays the standard deviation count for the section during section total display.

[MAX Count]
* Displayed during count set 
weighing only.

The maximum count of proper dumps that occur between the start time and stop time.
Unit: pcs
Displays the maximum count for the channel during channel total display.
Displays the maximum count for the section during section total display.

[MIN Count]
* Displayed during count set 
weighing only.

The minimum count of proper dumps that occur between the start time and stop time.
Unit: pcs
Displays the minimum count for the channel during channel total display.
Displays the minimum count for the section during section total display.

[Count Range]
* Displayed during count set 
weighing only.

The difference between the maximum count and minimum count of proper dumps that 
occur between the start time and stop time.
Unit: pcs
Displays the count range for the channel during channel total display.
Displays the count range for the section during section total display.

[Mean Piece Weight]
* Displayed during count set 
weighing only.

The mean piece weight of proper dumps that occur between the start time and stop 
time.
Unit: g (“oz” is used in case of ounce supported)
This is not displayed in case of mix weighing during channel total display.
The mean piece weight is displayed during single weighing or section total display.
This is not displayed while section switching is available during channel total display.

[S.D. Piece Weight]
* Displayed during count set 
weighing only.

The standard deviation piece weight of proper dumps that occur between the start time 
and stop time.
Unit: g (“oz” is used in case of ounce supported)
This is not displayed in case of mix weighing during channel total display.
The standard deviation piece weight is displayed during single weighing or section 
total display.
This is not displayed while section switching is available during channel total display.

[MAX Piece Weight]
* Displayed during count set 
weighing only.

The maximum piece weight of proper dumps that occur between the start time and 
stop time.
Unit: g (“oz” is used in case of ounce supported)
This is not displayed in case of mix weighing during channel total display.
The maximum piece weight is displayed during single weighing or section total 
display.
This is not displayed while section switching is available during channel total display.

[MIN Piece Weight]
* Displayed during count set 
weighing only.

The minimum piece weight of proper dumps that occur between the start time and stop 
time.
Unit: g (“oz” is used in case of ounce supported)
This is not displayed in case of mix weighing during channel total display.
The minimum piece weight is displayed during single weighing or section total 
display.
This is not displayed while section switching is available during channel total display.

Table 6-39  Total Data Items (Continued)

Item Name

Description

Summary of Contents for CCW-R-2 B Series













































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CCW-R-2 B Series

Parker Research Corp 400 Series Operating Instructions preview
400 Series
Brand: Parker Research Corp Pages: 3
S.I.T.A. 400 Series Manual Of Installation, Use And Maintenance preview
400 Series
Brand: S.I.T.A. Pages: 32
Hanil J1250 User Manual preview
J1250
Brand: Hanil Pages: 60
Panasonic WJHD100 - DIGITAL DISC RECORDE Specifications preview
WJHD100 - DIGITAL DISC RECORDE
Brand: Panasonic Pages: 7
3M Littmann 3200 User Manual preview
Littmann 3200
Brand: 3M Pages: 48
3M Littmann 3100 Instructions For Use Manual preview
Littmann 3100
Brand: 3M Pages: 19
3M Speedglas G5-01 User Instructions preview
Speedglas G5-01
Brand: 3M Pages: 62
Thomas & Betts Quickfit Nexus Exit Installation Manual preview
Quickfit Nexus Exit
Brand: Thomas & Betts Pages: 2
xsto DC Series Operation Manual preview
DC Series
Brand: xsto Pages: 76
F&V R-3 User Manual preview
R-3
Brand: F&V Pages: 5
F Care Systems EVRF Quick User Manual preview
EVRF
Brand: F Care Systems Pages: 2
Gardner Bender CP2000 Instruction Sheet preview
CP2000
Brand: Gardner Bender Pages: 8
NARIKA M1-S Instruction Manual preview
M1-S
Brand: NARIKA Pages: 2
K-LASER Blue Derma Operating Instruction preview
Blue Derma
Brand: K-LASER Pages: 70
K-LASER Blue Dental Operating Instruction preview
Blue Dental
Brand: K-LASER Pages: 72
York 1002 Assembly Instruction Manual preview
1002
Brand: York Pages: 26
TC Electronic Konnekt 24D User Manual preview
Konnekt 24D
Brand: TC Electronic Pages: 67
Tascam SS-CDR1 Technical Documentation preview
SS-CDR1
Brand: Tascam Pages: 3

Brands by name

Popular brands

Load more brands