iseg THQ Desktop, Technical Documentation Manual

Page: 11 / 41

2.2 19“ System
SPECIFICATIONS THQ 19” SYSTEM
Channels Up to 3
High voltage Up to 30 kV
Module compatibility (1 CPS, DPS, EPS (3 (combinable)
- wie 1 und 2 Kanal
voltage setting – local turn potentiometer – V
SET
(local)
Resolution voltage setting – Remote analog I/O with V
set
/V
mon
= 0 to 5 V (remote) or Interface
Resolution current setting – local turn potentiometer – I
SET
(local)
Resolution current setting – Remote analog I/O with V
set
/V
mon
= 0 to 5 V (“remote”) or Interface
4-digit Display Interface (USB)
Resolution voltage measurement V
out
< 1 kV 0,1 V 0,01 V
V
out
1 kV – 8 kV 1 V 0,1 V
V
out
> 10 kV 10 V 1 V
Resolution current measurement 4-digit Display Interface (USB)
I
out
< 10 mA 1 µA 0,1 µA
I
out
10 mA – < 0,1 A 10 µA 1 µA
I
out
> 0,1 A 0,1 mA 10 µA
Measurement accuracy
The measurement accuracy is guaranteed in the range 1% • V
nom
< V
out
< V
nom
/ 1% • I
nom
< I
out
< I
nom
and for 1 year
Protection (1 INHIBIT
Overload and short circuit protected
( ATTENTION: there is only one short circuit or arc per second allowed!)
HV connector CPS 0 – 7 kV: SHV Figure 20
≥ 10 kV: L16 Figure 21
≥ 20 kV: L30 Figure 22
DPS SHV Figure 20
EPS (60W) 0 – 7 kV: SHV Figure 20
≥ 10 kV: L16 Figure 21
≥ 20 kV: L30 Figure 22
Rated AC mains input 100 – 264 VAC with PFC
Input power 75 W 100 W 200 W
Fuse 5x20mm 2.0A, inert 5x20mm 4.0A, inert
AC power connector IEC 60320-C14, Figure 23
Connection AIO
(2
Figure 18,
USB Figure 19
THQ Systems - CONFIGURABLE AC/DC LABORATORY HV SUPPLY | Last modified on: 2022-04-21 | www.iseg-hv.com 11/41