8 Installing the Driver
8.1 Windows USB driver installation
The FTDI VCP driver (Virtual COM Port) can be downloaded from:
under Software
➜
Tools “FTDI-USB-Serial-Driver-Windows-2.x.x.exe”
➜
1.
Download and install the driver
2.
Connect the HV device to the computer via USB
3.
The Found new Hardware wizard appears. Please choose “No, not this time” in the first dialog and then click Next.
Figure 5: New Hardware
4.
Please choose the directory you extracted the driver to and the click Next.
5.
After some copying you get the final dialog.
Figure 6: Finish Install
It may be necessary to do the steps 3 to 6 again, before the device can be used (the first time, a bus driver is installed, the second
time, the virtual COM port driver is installed).
THQ Systems - CONFIGURABLE AC/DC LABORATORY HV SUPPLY | Last modified on: 2022-04-21 | www.iseg-hv.com
18/41
