IS5 COMMUNICATIONS iES6 Series, User Manual

Page: 56 / 59

iES6 Series User’s Manual
iS5 Communications Inc. 57
iES6 Series Commands Level Description Example
[IP address]
smtp authentication G Enable SMTP auth. switch(config)#smtp authentication
smtp account
[account]
G Configure authentication
account switch(config)#smtp account User
smtp password
[password]
G Configure authentication
password switch(config)#smtp password
smtp rcptemail
[Index] [Email address]
G
Configure Rcpt e-mail
Address switch(config)#smtp rcptemail 1
Alert@test.com
show smtp P Show the information of
SMTP switch#show smtp
no smtp G Disable SMTP function switch(config)#no smtp
event device-restart
[Systemlog|SMTP|Both]
G Set restart event type switch(config)#event device-restart both
event authentication-failure
[Systemlog|SMTP|Both]
G Set Authentication failure
event type switch(config)#event authentication-
failure both
event iRing-topology-change
[Systemlog|SMTP|Both]
G Set ring topology
changed event type switch(config)#event ring-topology-
change both
event syslog
[Link-UP|Link-Down|Both]
I Set port event for system
log switch(config)#interface fastethernet 3
switch(config-if)#event syslog both
event smtp
[Link-UP|Link-Down|Both]
I
Set port event for SMTP switch(config)#interface fastethernet 3
switch(config-if)#event smtp both
show event P Show event selection switch#show event
no event device-restart
[Systemlog|SMTP|Both]
G Disable cold start event
type switch(config)#no event device-restart
no event authentication-
failure
[Systemlog|SMTP|Both]
G Disable Authentication
failure event type switch(config)#no event authentication-
failure
no event iRing-topology-
change
[Systemlog|SMTP|Both]
G Disable iRing topology
changed event type switch(config)#no event ring-topology-
change
no event syslog I
Disable port event for
system log switch(config)#interface fastethernet 3
switch(config-if)#no event syslog
no event smtp I Disable port event for
SMTP switch(config)#interface fastethernet 3
switch(config-if)#no event smtp
show syslog P Show system log client &
server information
switch#show syslog