iES6 Series User’s Manual
iS5 Communications Inc.
44
5.1.10.4
System Warning – Event Selection
SYSLOG and SMTP are the two warning methods supported by the system. Check the corresponding
box to enable the system event warning method required. Please note that the check box cannot be
checked while SYSLOG or SMTP is disabled.
Figure 41 - System Warning – Event Selection Interface
The following table describes the labels for the System Warning screen.
Label
Description
System Event
System Cold Start
Alert when the system restarts.
Power Status
Alert when there is a power up or down.
SNMP Authentication
Failure
Alert when there is a SNMP authentication failure.
iRing Topology Change
Alert when the iRing topology changes.
Port Event
SYSLOG / SMTP event
Disable
Link Up
Link Down
Link Up & Link Down
Apply
Click “
Apply
” to activate the configurations.
