iES6 Series User’s Manual
iS5 Communications Inc.
53
iES6 Series Commands
Level Description
Example
no security
I
Disable security of
interface
switch(config)#interface fastEthernet 2
switch(config-if)#no security
state
[Enable | Disable]
I
Use the state interface
configuration command
to specify the state mode
of operation for Ethernet
ports. Use the disable
form of this command to
disable the port.
switch(config)#interface fastEthernet 2
switch(config-if)#state Disable
show interface configuration
I
show interface
configuration status
switch(config)#interface fastEthernet 2
switch(config-if)#show interface
configuration
show interface status
I
show interface actual
status
switch(config)#interface fastEthernet 2
switch(config-if)#show interface status
show interface accounting
I
show interface statistic
counter
switch(config)#interface fastEthernet 2
switch(config-if)#show interface
accounting
no accounting
I
Clear interface
accounting information
switch(config)#interface fastEthernet 2
switch(config-if)#no accounting
6.4
Commands Set List — RSTP command set
iES6 series Commands
Level Description
Example
RSTP enable
G
Enable RSTP
switch(config)#RSTP enable
RSTP priority
[0to61440]
G
Configure RSTP priority
parameter
switch(config)#
RSTP priority 32768
RSTP max-age
[seconds]
G
Use the RSTP max-age
global configuration
command to change the
interval between
messages the RSTP
receives from the root
switch. If a switch does
not receive a bridge
protocol data unit (BPDU)
message from the root
switch(config)# RSTP max-age 15
