iES6 Series User’s Manual
iS5 Communications Inc.
47
Command Line Interface Management
6.1
About CLI Management
Besides WEB-based management, iES6/iES6-S Series also supports CLI management. The switch console port
or Telnet can be used to configure the switch via the CLI.
CLI Management by RS-232 Serial Console (9600, 8, none, 1, none)
Use an RJ45 to DB9-F cable to connect to the switch’s console and to a local PC’s COM port.
Follow the steps below to access the console via the RS-232 serial cable.
(1)
Start Tara Term application.
Figure 46 - Tera Term
(2)
Under
Setup
select
Serial Port
.
Figure 47 – Setup Drop-down Menu
(3)
Select the COM Port on your PC used to connect to the Console Port. Set the rest of the properties
to: 9600 for Baud rate, 8 for Data bits, None for Parity, 1 bit for Stop and none for Flow control, then
press “OK”.
