IS5 COMMUNICATIONS iES28GF User Manual Download Page 52

Page: 52 / 205

iES28TG/iES28GF User Manual

iS5 Communications Inc.

Label

Description

Mode

Indicates the selected SSH mode. The modes include:

Enabled

: enable SSH.

Disabled

: disable SSH.

Save

Click to save changes.

Reset

Click to undo any changes made locally and revert to previously saved
values.

5.1.12

LLDP

LLDP Configurations

This page allows you to examine and configure LLDP port settings.

Label

Description

Port

The switch port number to which the following settings will be

applied.

Mode

Indicates the selected LLDP mode

Rx only

: the switch will not send out LLDP information, but LLDP

information from its neighbors will be analyzed.

Tx only

: the switch will drop LLDP information received from its

neighbors, but will send out LLDP information.

Disabled

: the switch will not send out LLDP information, and will drop

LLDP information received from its neighbors.

Enabled

: the switch will send out LLDP information, and will analyze

LLDP information received from its neighbors.

Summary of Contents for iES28GF














































































































































































































Search results

Summary of Contents for iES28GF

Reviews:

Related manuals for iES28GF

Brands by name

Popular brands

IS5 COMMUNICATIONS iES28GF, User Manual

Search results

Summary of Contents for iES28GF

Reviews:

Related manuals for iES28GF

Brands by name

Popular brands