iES28TG/iES28GF User Manual
124
iS5 Communications Inc.
5.8.2
IGMP Snooping VLAN Configurations
Each page shows up to 99 entries from the VLAN table, with a default value of 20, selected by the
Entries Per Page
input field. When first visited, the web page will show the first 20 entries from the
beginning of the VLAN Table. The first displayed will be the one with the lowest VLAN ID found in the
VLAN Table.
The
VLAN
input field allows the user to select the starting point in the VLAN Table. Clicking the
Refresh
button will update the displayed table starting from that or the next closest VLAN Table match.
The
>>
will use the last entry of the currently displayed entry as a basis for the next lookup. When
the end is reached, the text
No more entries
is shown in the displayed table. Use the
|<<
button to start over.
Label
Description
Delete
Check to delete the entry. The designated entry will be deleted during the
next save.
VLAN ID
The VLAN ID of the entry.
IGM P Snooping
Enable
Check to enable IGMP snooping for individual VLAN. Up to 32 VLAN’s can be
selected.
Querier Election
Enable to join IGMP Querier election in the VLAN. Disable to act as an
IGMP Non-Querier.
Querier Address
Define the IPv4 address as source address used in IP header for IGMP
Querier election.
When the Querier address is not set, system uses IPv4 management
address of the IP interface associated with this VLAN.
When the IPv4 management address is not set, system uses the first
available IPv4 management address.
Otherwise, system uses a pre-defined value. By default, this value will be
192.0.2.1.
Add New IGMP VLAN
Click to add a new entry into the table.
Save
Click to save changes.
Reset
Click to undo any changes made locally and revert to previously saved
values.
