IS5 COMMUNICATIONS iES28GF User Manual Download Page 45

Page: 45 / 205

iES28TG/iES28GF User Manual

iS5 Communications Inc.

New Password

The new system password. The allowed string length is 0 to 31, and only

ASCII characters from 32 to 126 are allowed.

Confirm New

Password

Re-type the new password.

Save

Click to save changes.

5.1.3

Authentication Method

Configure how a user is authenticated when he/she logs into the switch via one of the management

interfaces.

Label

Description

Client

The management client for which the configuration below applies.

Authentication

Method

Authentication Method can be set to one of the following values:

None:

authentication is disabled and login is not possible.

Local

: local user database on the switch is used for authentication.

Radius

: a remote RADIUS server is used for authentication.

Save

Click to save changes

Reset

Click to undo any changes made locally and revert to previously saved

values

5.1.4

IP Setting

You can configure IP information of the switch in this page.

Summary of Contents for iES28GF














































































































































































































Search results

Summary of Contents for iES28GF

Reviews:

Related manuals for iES28GF

Brands by name

Popular brands

IS5 COMMUNICATIONS iES28GF, User Manual

Search results

Summary of Contents for iES28GF

Reviews:

Related manuals for iES28GF

Brands by name

Popular brands