AVS-1210
I.R.T. Communications Pty Ltd | www.irtcommunications.com
Revision 06
GENERAL DESCRIPTION
The AVS-1210 10 x 1 analogue video switcher is a self-contained, mains powered unit occupying one unit of rack
mounting space. It has the capability to switch any one of its ten loop-through inputs to its output. The output has
two isolated feeds. Selection of the required input is made via a "D" type connector mounted on the rear panel,
using a 4 or 5 bit code.
The switcher can be fitted with a CPS-1210 10 x 1 or a CPS-1220 dual 10 x 1 (20 x 1) Control Panel.
The switcher can be remotely controlled by using CPS-1050 10 x 1 or CPS-1052 20 x 1 remote control panels.
The AVS-1210 is provided with an eleventh (cascade) input to facilitate two AVS-1210 switchers to be linked
providing 20 x 1 operation using either a CPS-1220 locally or CPS-1052 remotely.
The input circuits of this series of switcher are designed for loop through operation to allow several switchers to be
stacked with common inputs, without the need for additional distribution amplifiers.
The switcher is housed in an IRT one rack unit (44 mm high) 483 mm (19 inch) rack mounting metal chassis. The
input and output circuit connections are by means of BNC sockets mounted on the edge of the printed circuit
board, accessible from the rear panel of the unit.
Control/tally connections to the switch data buss are made to a pair of 25 pin "D" connectors mounted on the rear
panel. The control system is compatible with that used for control of IRT’s AAS-1220 10 x 1 stereo audio switcher
and with 3000 series Eurocard modules.
An internal AC mains powered regulated power supply provides the operating voltages for the switcher circuitry. A
selector on the rear panel allows matching to local mains supply voltages.
Accessories
CPS-1210
10 x 1 Local control panel.
CPS-1220
20 x 1 Local control panel.
CPS-1050
10 x 1 Remote control panel.
CPS-1052
20 x 1 Remote control panel.
CDC-3060
Serial control module for interfacing to RS-232 or computer control systems.
GDW-1050
10 way HE14 to D25 male adapter cable to connect remote panel to switcher.
