AVS-1210
I.R.T. Communications Pty Ltd | www.irtcommunications.com
Revision 06
Connections for AA-294 switcher as audio follow:
To connect an AA-294 stereo switcher to the AVS-1210 switcher the following cable is required.
AVS-1210
AA-294
25 Pin "D"(male)
to
25 Pin "D"(male)
PL 5
to
J1
Pin
to
Pin
Pin 15
to
Pin 15
Pin 18
to
Pin 18
Pin 19
to
Pin 19
Pin 20
to
Pin 20
Pin 21
to
Pin 21
The above connections only are required and connection of other pins may cause incorrect operation.
20 x 1 operation:
For 20 x 1 operation LK 2 should be installed. (For normal operation it must not be installed.)
While LK 2 is installed the switcher will respond to commands for crosspoints 11 – 20 as if they were 1 – 10. Any
code outside this range will cause the switcher to select the expansion input.
The remote control cable from a CPS-1052 to an AVS-1210 is the same as that for a CPS-1050 described previously.
A CPS-1220, 20 button, local control panel may be fitted to the AVS-1210 in addition to, or in place of, the
CPS-1052 remote control panel.
See remote control panel manual for configuration options including audio breakaway and multiple remote control
wiring.
