Ironwood JT400 | User Manual
13
6.0 Assembly
6.1 Fence Assembly
PARTS REQUIRED:
• Fence assembly
TOOLS REQUIRED:
• Wrenches
The cast iron fence assembly allows the safest and most effective
method of jointing. The fence should always be used for straight
work cutting to guide the workpiece.
The fence assembly is
attached to the pallet
for shipping.
1. Remove the two bolts that secure the fence assembly to the
pallet for shipping.
2. Attach the fence assembly to the machine body at the two
holes using the provided cap screws and lock washers.
Fence
Cap screw and
lock washer.
Hole locations
6.2 Dust Collection Manifold
PARTS REQUIRED:
• Dust collection manifold
TOOLS REQUIRED:
• Allen wrenches
Attach the dust collection
manifold over the dust
exhaust outlet.
The dust exhaust outlet is located at the left-bottom of the machine.
Attach the dust manifold using the provided Allen screws.
The outlet diameter is
6
" (
152
mm). Use a proper diameter of dust
pipe to connect the exhaust outlet to a dust collector.
NOTE: Make sure access door inside dust manifold is closed prior to
installing dust collection manifold.
Summary of Contents for JT400
Page 24: ...Ironwood JT400 User Manual 24 9 1 Electrical Print...
Page 25: ......
