Ironwood JT400 | User Manual
10
3.6 Level
TOOLS REQUIRED:
• Bubble Level
• Adjustable wrench
Use a bubble level along the length and width of the tabletop surface
to check for level. Use an adjustable wrench to adjust leveling bolts
to level machine.
Be sure to level
the machine.
3.7 Pre-Operation Cleaning
WaRninG
Use proper cleaning agents and methods described below. Do not
use gasoline or other petroleum-based solvents. There is a risk of
explosion and burning if these products are used. Serious personal
injury may occur.
The machine is shipped
with protective paper on
the table assembly.
Remove and discard the protective paper from the table assembly.
Remove the rust-preventative oil that coats the machine using a soft
cloth and nonflammable degreasing agent, such as Simple Green or
other citrus-based cleaners. Do not use abrasive pads.
Caution
Use extreme care when cleaning or working with the cutterhead.
The knives are very sharp.
Summary of Contents for JT400
Page 24: ...Ironwood JT400 User Manual 24 9 1 Electrical Print...
Page 25: ......
