Ironwood JT400, User Manual

Page: 8 / 26

Ironwood JT400 | User Manual 8
4. Remove the plastic sleeve from the side access door handle.
The door is locked when the handle is in the vertical position.
Turn the handle to the right to unlock and open the access
door.
5. Open the access doors and check for hardware, accessories,
and tool kit that may be shipped inside the machine. If
additional accessories are ordered, they may be delivered
separately.
6. Close and lock the access doors.
3.3 Inspection
Save all containers and packing materials until you are satisfied
that your machine has arrived in good condition. If you discover the
machine is damaged after you’ve signed for delivery, immediately
call Stiles Customer Service at 616.698.7500.
When you are completely satisfied with the condition of your
equipment, you should inventory its parts.
Open and check the contents of all containers to ensure all tools,
hardware, and accessories are included. The tool kit should contain
the following items:
1. 4-piece open end wrench set
2. 4mm, 5mm, 6mm and 8mm short handle Allen wrenches
3. 5mm long-handle Allen wrench
4. Access door handle/key
5. Three (3) 5mm T-handle Allen wrenches
6. Eight (8) extra carbide inserts (30 x 12 x 1.5mm)
7. Two (2) extra angle carbide inserts (30 x 12 x 1.5mm)
8. Seven (7) extra cutterhead gibs
9. Seven (7) extra cutterhead nuts
10. Seven (7) extra cutterhead set screws
11. Four (4) leveling pads
12. Four (4) leveling bolts with nut
13. Two (2) push pads
14. Paint (2 color set)
15. User manual
3.4 Move Machine to Final Position
Be sure the site is properly prepared. Refer to section 2.0 for details.
Be sure the cabinet door is closed and locked before transporting.
TOOLS REQUIRED:
• Hand truck or fork lift
Use a hand truck or fork lift to move the machine on its pallet to its
final location. If using a fork lift, make sure fork travel is clear of any
obstacles.
Use a crane fork
lift or hand
truck to move
the machine
on its pallet.