Page of 8
3
IMPORTANT SAFETY CONSIDERATIONS
WORK AREA
•
Keep work area clean,
free of clutter and well lit.
Cluttered and dark work areas can cause
accidents.
•
Do not use your tool where there is a risk of causing a fire or an explosion;
e.g. in the
presence of flammable liquids, gasses, or dust. Power tools create sparks, which may ignite
the dust or fumes.
•
Keep children and bystanders
away while operating a power tool. Distractions can cause
you to lose control, so visitors should remain at a safe distance from the work area.
•
Be aware of all power lines, electrical circuits,
water pipes and other mechanical
hazards in your work area, particularly those hazards below the work surface hidden from
the operator’s view that may be unintentionally contacted and may cause personal harm or
property damage.
•
Be alert of your surroundings.
Using power tools in confined work areas may put you
dangerously close to cutting tools and rotating parts.
ELECTRICAL SAFETY
•
WARNING:
Always check to ensure the power supply corresponds to the voltage on the
rating plate.
•
Do not abuse the cord.
Never carry a portable tool by its power cord, or yank tool or extension
cords from the receptacle.
Keep power and extension cords away from heat, oil, sharp edges or
moving parts. Replace damaged cords immediately.
Damaged cords may cause a fire and
increase the risk of electric shock.
•
Grounded tools
must be plugged into an outlet properly installed and grounded in accordance
with all codes and ordinances
.
Never remove the grounding prong or modify the plug in any way.
Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to
whether the outlet is properly grounded.
•
Double insulated tools
are equipped with a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still doesn’t fit, contact a qualified electrician to install a polarized outlet. Do
not change the plug in any way.
•
Avoid body contact
with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
•
When operating a power tool outside,
use an outdoor extension cord marked “W-A” or “W.”
These cords are rated for outdoor use and reduce the risk of electric shock.
•
Extension Cord Use:
A. Use only ‘Listed’ extension cords. If used outdoors, they must be marked “For Outdoor
Use.” Those cords having 3-prong grounding type plugs and mating receptacles are to be
used with grounded tools.
B. Replace damaged or worn cords immediately.
C. Check the nameplate rating of your tool. Use of improper size or gauge of extension cord
may cause unsafe or inefficient operation of your tool. Be sure your extension cord is rated to
allow sufficient current flow to the motor. For the proper wire gauge for your tool, see chart.
