Page of 8
6
OPERATION:
SWITCH
WARNING: Be safe! Protect your eyes and wear safety goggles at all times
while operating bench top buffer.
The switch is located on the front of the base of this buffer. Move On/Off switch to the On position to
activate.
NOTE:
ALWAYS turn bench top buffer OFF via the switch in the event of a disruption in the
electrical power supply. This will safeguard operator against possible injury when power is restored.
MAINTENANCE
WARNING:
Make sure this tool is disconnected from its power source before attempting
any maintenance, cleaning, or inspection.
•
Maintain your Bench Top Buffer.
It is recommended that the general condition of any Bench
Top Buffer be examined before it is used. Keep your Bench Top Buffer in good repair by
adopting a program of conscientious repair and maintenance. Have necessary repairs made by
qualified service personnel.
•
Cleaning and Lubrication.
Use only mild soap and a damp cloth to clean the tool. Never let
any liquid get inside the tool, and never immerse any part of the tool into a liquid. Self-lubricating
bearings are used in the tool and periodic lubrication is not required.
DIAGRAM AND PARTS LIST
