Page of 8
2
Thank you very much for choosing an Ironton product! For future reference, please complete
the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first contacted the
distributor to determine if it can or should be performed on the product.
For technical questions please call
1-800-222-5381
.
INTENDED USE:
This Bench Top Buffer is ideal for buffing and polishing copper, steel, brass, nickel, silver and
chrome-plated products.
TECHNICAL SPECIFICATIONS:
• Rated Voltage:
120 Volts 60Hz
• Rated Input Power:
3/4 HP
• Delivers:
3450 RPM
• Cloth Wheel:
8in. x 5/8in. x 3/4in. (arbor)
• Flannel Wheel:
8in. x 5/8in. x 1/2in. (arbor)
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed
below may result in serious injury.
CAUTION:
Do not allow persons to operate or assemble this Bench Top Buffer
until
they have read this manual and have developed a thorough understanding of how the Bench
Top Buffer
works.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur.
It must be
understood by the operator that common sense and caution are factors that cannot be built into this
product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS